K23

Felling head

for tractors and 5-8 ton excavators

Features

  • Light and efficient
  • Excellent loading capabilities
  • Effective guillotine cutting, 23 cm
  • Easy installation, no additional hydraulics or hosing
  • Radio control option

Suitable for

  • Felling and loading of single trees
  • Delimbing before felling
  • Clearing of bushes and roadsides

FELLING AND LOADING

Naarva K23 is easy and quick to mount to a tractor, to the place of loading grapple. It can be used to fell, load and cut trees, branches and bushes.

STRONG GUILLOTINE

This light weight felling head can cut 23 cm thick trees with ease. The cutting of trees, big or small, does not put a strain on the loading grapple.

excellent loading properties

Tilt cylinder switches the position of the head from felling to loading. Cutting can be done in both positions. During loading the cutting blade stays inside the frame and is not in the way.

radio control option

You don”t have to worry about the cable when you have radio control. Plug in the battery and you are ready. Radio control package includes transmitter, receiver, two batteries, charger and an inverter for the battery.

Naarva K23
Naarva K23
Naarva K23
Naarva K23
Naarva K23
Naarva K23

Technical information

Strong guillotine
Factory code K23
Weight 200 kg
Height in felling positions 70 cm
Grapple opening 60 cm
Cutting diameter*, force and time ** Max. cutting: Ø23 cm Cutting force: 95 kN Cutting time: 1.8 s
Required pressure 170-200 bar
Required oil flow 40-70 l/min
Warranty 12 months of 1000 hours
Control system Cable control with 3 buttons
Voltage 12V or 24V
* The max. cutting diameter is approx. 30% lower for hard wood (such as oak and beech). ** With 55 l/min oil flow All provided values are approximations. The manufacturer reserves the right to make changes in the products. 04/2011.
  • Radio control with various control options
  • Extension boom for 5-8 ton excavator, 1 m reach
  • Cejn Flat face quick couplings
  • Finn-Rotor rotators
  • Link for the rotator
  • Spare part packages
    • The basic wear and tear part package includes seal kits, rubber dampers and valve connectors.
    • The comprehensive kit includes the same as the basic kit as well as two valves and a complete hose set.