Felling head

for tractors and 5-8 ton excavators


  • Quick and strong guillotine cutting Ø 24 cm
  • Weight only 200 kg
  • Easy to install without any extra hoses or cables

Suitable for

  • Felling energy wood and small wood
  • Cleaning bushes, road sides and field edges
  • Loading of trees

Electricity free control

Naarva K24 felling head is mounted to a loading crane to the place of a loading grapple. All functions are operated with “grapple open / close” valve. It does not require extra hydraulics or any electricity.

Sequence valves operate cutting and tilt function automatically. When “grapple close” function is used and pressure reaches a limit, the guillotine starts cutting. When “grapple close” function is kept pressed the pressure reaches a higher limit and the felling head goes to loading position

Quick and strong guillotine cutting

New quick and strong cutting guillotine was designed for Naarva K24. It can cut up to
24 cm (9″ ) thick trees. Cutting time is 1,2 seconds (oil flow 70 liter / min). Guillotine grips close around the tree and press it against the cutting blade.

The cutting guillotine is maintenance free. Only maintenance required is greasing the nipples. Cutting unit is on a sliding frame so strain from the cutting does not damage the felling head.

Loading of trees

New Naarva K24 felling head is very suitable for loading of trees. Hydraulic cylinder tilts the head to loading position. You can load and cut trees in the loading position. Cutting blade is in the back and is not in the way when loading.

Technical information

Model K24
Weight 225 kg
Grapple opening 60 cm
Cutting Ø 24 cm
Voltage Model is electricity free
Control Grapple open / close valve
  • Finn-Rotor rotator
  • Swing damper for rotator
  • Naarva quick coupling set for Naarva and a loading grapple